- ＨＯＭＥ
- standard lineup
- push out nozzle
Push Out Nozzle ( CIP )
Feature TPN-2
Push-out nozzle that is attached to the outside surface of the duct, and the like tank, cleaning the inside surface. Make the rotation washed uplift only the tip of the nozzle during cleaning. Except during cleaning is stored in the inner surface of the tank, these are suitable for CIP cleaning of sanitary effect.
Main Specification
| Pressure | 0.2～0.5MPa |
|---|---|
| Flow Rate | 81～121L/min |
| Reaching Distance（L1） | 1,600～1,950ｍｍ |
| Spreading Distance（L2） | 4,000～4,600ｍｍ |
| Spreading Angle（Q1） | 0°～ 40° |
| Heat Resistance | 80℃ |
| Chemical Resistance | Weak Acid Weak Alkali:within3％ |
| Joint | 1S Ferrule |
| Weight | about 1.3ｋｇ |
Feature TPN-2S
This is high pressure cleaning nozzle that change to the straight structure from conventional products. Stability and the rotational performance of the nozzle, stagnation of the cleaning liquid is gone with this Design change. Besides, at the time of air blow realize more effective draining and improvement of sanitary.
Main Specification
| Pressure | 0.2～0.5MPa |
|---|---|
| Flow Rate | 81～121L/min |
| Reaching Distance（L1） | 1,600～1,950ｍｍ |
| Spreading Distance（L2） | 4,000～4,600ｍｍ |
| Spreading Angle（Q1） | 0°～ 40° |
| Heat Resistance | 80℃ |
| Chemical Resistance | Weak Acid Weak Alkali:within3％ |
| Joint | 1S Ferrule |
| Weight | about 1.3ｋｇ |
